@    = LOW BATTERY =
  Connect to Charger
@      = HOLD =
   You must hold off
  before powering on
  = REC BUTTON  ON =
  You must record off
@  BootLoader ver 1.10
App failed.
@  = FIRMWARE REPAIR =
 The device firmware
 needs repair.
 Please, connect to PC
 and repair firmware
 with recovery utility
 It will be turned off
  = INITIAL FAIL =
 The device can not
 initialize HDD.
 Please, connect to
 adaptor and try again
And will be turned off
@ = DATA TRANSFERRING =
   Do not Disconnect
 Device from computer
@   = USB CONNECTED =
 Please Safely remove
 Device from Computer
@  = DISCONNECT USB =
   It's OK for you
 to Disconnect Device
 Safely from computer
  = SAFELY REMOVE =
 The device database
 can be damaged
 if you disconnect the
 device without safely
 removing from windows

 to Disconnect Device.

@Bootloader failed.
@Press SW11
SW11
Diagnostics Completed
RETRIEVE FAILED...
@6005 MP3 Player
PPI Inc
DNLM
Connect Line-In
Press Play to start
Play
Recording...
Playing back
----------------------
AKM Codec Test Started
If you want to test,
press Play key
If not, press Menu key
SW11
AKM Codec Test started
Please Wait...
AKM Codec Test Completed
----------------------
KeyTest Started
If you want to test,
press any key
If not, press Menu key
NO SWITCH PRESSED
TIME OUT
Test Completed
----------------------
LCD Test Started
If you want to test,
press Play key
If not, press Menu key
Play
SW11
Gray ScaleTest
Pattern Test
AlternateData Test
LCD Test Completed
100%....
60%.....
70%.....
80%.....
90%.....
30%.....
40%.....
50%.....
10%.....
f20%.....
Sdram Test Failed
`----------------------
SDRAM test Started
If you want to test,
press Play key
If not, press Menu key

Play
SW11
Sdram Test Started
Sdram Initialized
Size detected is:
bytes
Testing....Pls wait
Test passed.
Flash Test started
Pls Wait...
Checksum is 
Flash Test Completed
Xch.Data:%01d.%03dV
Ych.Data:%01d.%03dV
Zch.Data:%01d.%03dV
ADC Test Started 
Apply Voltages To
X,Y,Z Channels   
And Press SW11   
SW11
Test ADC XYZ Channels
Testing Completed
----------------------
USB 2.0 Test Started
If you want to test,
press Play key
If not, press Menu key
PLAY
SW11
All HVTs are done
Tel. 3560
joseph.k.kim@samsung.com
USB Test Started
Connect USB Cable
And Press Play 
Play
Transfer Files & 
Disconnect Cable 
This is the final 
test for HVT 
Congratulations!!
Cable Disconnected
USB Test Completed
----------------------
Hdd Test Started
Hdd is Detected
Size of HDD in MB
Hdd Test Completed
Hdd is not detected
BattLevel:%3.1d(%d)
Charging Off
Charging On
BATT Test Started 
Press MENU to exit 
----------------------
Batt Monitor Test Started
If you want to test,
press any key
If not, press Menu key
SW11
Testing Completed

RTC Test begin
RTC Test in Progress
--------------------
%02d:%02d:%02d
RTC Test OK
RTC Test Completed
RTC Test Fail
USBC
@SW11
Record
Play
Next
Previous
VolumeUp
VolumeDown
Select
Hold
LineIn
Charge
NO SWITCH PRESSED
0123456789ABCDEF
0123456789abcdef
SW3 Boot FAT32 HDD
SW5 Run Diagnostics
Samsung
Digital Audio Player
Samsung 
YH-925          
SYSTEM\FW_YH925.MI4
SYSTEM\PP5020.BIN
*UK7
J2RSJ2J0B
R3R2J
P1PJ
mzHz
USBS
PRTLPLYR6005 with 5020
USBS
PRTLPLYR6005 with 5020