From: Herbert Poetzl (herbert_at_13thfloor.at)
Date: Wed 09 Apr 2003 - 02:30:53 BST
On Tue, Apr 08, 2003 at 05:45:28PM -0700, Roderick A. Anderson wrote:
> I've been bringing up some vservers for individual domains on a box with
> two NICs (on two different sub nets), RHL 7.3 and ctx 2.4.20-16 (custom
> compiled adding a NIC driver). For some reason I keep getting 'No route
> to host' messages in /var/log/maillog and messages are not going out.
> This is very strange because I have an older set up that I've never had
> this problem with - well it doesn't have two NICs. I have a sinking
> feeling this is because of a routing issue (go figure :-) but can't with
> my limited knowledge figure it out. Paul's archives of this list have a
> discussion on a similar issue but that was back in 2001 and had no clear
> Can anyone give some pointers to a end-of-the-day nearly-brain-dead
> very-confused person?
if you have two different networks, on two different
nics, you'll probably need to setup advanced routing to
route through different gateways ...
please describe your configuration in more detail ...
> "Open Source Software - Sometimes you get more than you paid for..."