About this list Date view Thread view Subject view Author view Attachment view

From: Thomas Braselmann (braselmann_at_braselmann.net)
Date: Sat 05 Apr 2003 - 15:58:49 BST

Hello List,
i had trouble to patch the original 2.4.20 Kernel from Slackware 9.1
so i have installed the original kernel from kernel org.
patch it with ctx 17
the patch was okay
root@obelix:~# uname -a
Linux obelix 2.4.20 #17 Mon Mar 17 22:45:18 PST 2003 i686 unknown
i setup up a minimal /etc/vservers/01.conf
look like this
S_FLAGS="lock nproc"
ULIMIT="-H -u 5"
after compiling kernel an setup vserver software
vserver-admin-0.22-1.i386.tgz <- rpm2tgz under slack from vserver-admin-0.22-1.i386.rpm file
i have following failure after start the server
root@obelix:~# vserver 01 start
Starting the virtual server 01
/vservers/01/.. has insecure permissions.
A vserver administrator may be able to visit the root server.
To fix this, do
         chmod 000 /vservers/01/..
do it anytime you want, even if vservers are running.
Server 01 is not running
Can't set the ipv4 root (Bad address)
in the mailing list archiv i found only something about wrong patches or failed patches with this failure
about the permisson problem ...
/vservers is a ext2 partiton with defaults
/dev/sda13       /vservers        ext2        defaults         1   2
drwxr-xr-x    4 root     root         4096 Apr  3 21:34 vservers/
please anyone know about what it could be else ?
all kind of help are welcome
kind regards

About this list Date view Thread view Subject view Author view Attachment view
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Tue 22 Apr 2003 - 18:41:46 BST by hypermail 2.1.3