About this list Date view Thread view Subject view Author view Attachment view

From: Joseph S Chung (jschung_at_itsd.gov.hk)
Date: Fri 06 Jun 2003 - 04:03:04 BST


I do not see eth0 with ifconfig command. It is not working.
I did not complie the kernel after downloading from web. How can I get the
.config file. I do not have one in /usr/src/linux-2.4. By the way, I am
using RedHat 9.0.
Thanks.
Joseph

From: Guillaume Plessis <gui_at_moolfreet.com> on 05/06/2003 18:07
Please respond to vserver_at_solucorp.qc.ca
To: vserver_at_solucorp.qc.ca
cc:
Subject: Re: [vserver] eth0 fail to start

Joseph S Chung wrote:
> I am not sure. It is Intel 82557/8/9 Ethernet Pro 100. How can I check?
> Thanks,
> Joseph

There are many way do to this :

1/ Check that the following options are marked "=y" or "=m" in the
.config file used during your kernel compilation:
CONFIG_NET_PCI
CONFIG_EEPRO100
in case of "=m", you ahve to check that the modules is loaded during the
system boot

2/ check that you get eth0 when you lauch "ifconfig -a"

3/ ...

Best regards

Gui


About this list Date view Thread view Subject view Author view Attachment view
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Fri 06 Jun 2003 - 04:21:48 BST by hypermail 2.1.3