About this list Date view Thread view Subject view Author view Attachment view

From: Herbert P÷tzl (herbert_at_13thfloor.at)
Date: Fri 25 Jul 2003 - 15:05:40 BST


Hi Warren!
Hi Darryl!

first, sorry Warren, for the bad diagnosis ...

the correct answer should have been:

  I did not check when, where and how, but the
  ulimit -u <#proc> option was changed between
  2.4.21 and 22-pre in such way that

  ulimit -H -u <#procs> may not decrease the
  limit below the current soft limit ...

  so if, and this time I'm sure ;), you have a
  higher default ulimit (see ulimit -a), it
  will not be possible to set the hard limit to
  a lower value, unless you reduce the default
  (soft) limit too ...

now for Darryls NFS issue ...

  I would suggest to do the mount from
  172.30.0.100:/mnt/data/vservers on
  /mnt/nfs and add the folowing bind mounts

  mount --bind /mnt/nfs/conf /etc/vservers
  mount --bind /mnt/nfs/actual /vservers

  and the permission stuff

  chmod 000 /vservers/radius2/..

  and of course, the ulimit will get you, if
  you change to 2.4.22-pre, which I would
  strongly advice, as many bugs where fixed.

best,
Herbert
  


About this list Date view Thread view Subject view Author view Attachment view
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Fri 25 Jul 2003 - 15:29:37 BST by hypermail 2.1.3