About this list Date view Thread view Subject view Author view Attachment view

From: Jean-Christophe Petit (jcpetit_at_syspark.com)
Date: Tue 17 Feb 2004 - 17:56:16 GMT


Hello,

I have a installed and configured secure quota with LVM and the quota support does not work.
I followed: http://www.13thfloor.at/old/VServer/HowTo_LVMQS.shtml
and http://list.linux-vserver.org/archive/vserver/msg05969.html

when ext3 or ufs is used (in the vserver1) I have the following errors:
Turning on quota. quotaon: using //aquota.group on /dev/hdv1 [/]: No such device or address
quotaon: using //aquota.user on /dev/hdv1 [/]: No such device or address

SETUP:
[ Redhat Enterprise 2.1 ]
 kernel 2.4.24
 patch-2.4.24-vs1.26.diff
 patch-2.4.24-vs1.26-q0.13.diff (I also tried with 0.12)

 util-vserver-0.28-1mdk
 quota-3.09-1.21
 vr-tools-0.14

kernel config:
 'Virtual root device' enabled in 'Block devices --->'
 'Quota support' enabled in 'File systems --->'
 'VFS v0 quota format support' enabled in 'File systems --->'
 'Persistend Context ID for files' at '(UID32/GID32)'

/dev/vservers is the LVM volume group
/dev/vservers/vs1lv LVM separate partition for the virtual vserver1
/dev/vroot/0 is the virtual root device used

the mtab of the vserver1 :
/dev/hdv1 / ufs rw,usrquota,grpquota 0 0

Make node with name for vserver: mknod /dev/vroot/0 b 4 0

----------------- /etc/vservers/vserver1.sh -----------------
#!/bin/sh
case $1 in
pre-start)
        e2fsck -p /dev/vservers/vs1lv
        mount -o rw,usrquota,grpquota /dev/vservers/vs1lv /vservers/vserver1
        rm -f /vservers/vserver1/dev/hdv1
        vrsetup /dev/vroot/0 /dev/vservers/vs1lv
        cp -fa /dev/vroot/0 /vservers/vserver1/dev/hdv1
        ;;
post-start)
        ;;
pre-stop)
        ;;
post-stop)
        mount -o remount,ro /vservers/vserver1
        umount /vservers/vserver1
        vrsetup -d /dev/vroot/0
        ;;
*)
        echo $0 pre-start
        echo $0 pre-stop
        echo $0 post-start
        echo $0 post-stop
        ;;
esac
----------------- /etc/vservers/vserver1.sh -----------------

dans /etc/vservers/vserver1.conf:
S_FLAGS="lock nproc"
S_CAPS="CAP_NET_RAW CAP_QUOTACTL"

many thanks for your help,

 --
Jean-Christophe Petit
Syspark inc.

_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver


About this list Date view Thread view Subject view Author view Attachment view
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Tue 17 Feb 2004 - 17:59:02 GMT by hypermail 2.1.3