About this list Date view Thread view Subject view Author view Attachment view

From: Stephen Frost (sfrost_at_snowman.net)
Date: Mon 18 Oct 2004 - 04:25:11 BST


Greetings,

  Getting repeated crashes (off and on) when using 2.6.8.1 and vserver
  1.9.2 (util-vserver 0.30.190). Machine is located remotely, first
  time an oops was logged. Appears to be in log_do_checkpoint under
  ext3. Possibly vserver-related, seems to happen shortly after
  IO-intensive vserver is started (though not always, lasted a few days
  between the last two crashes).

  If any other information would be useful, please don't hesitate to ask.

Version:
Linux version 2.6.8.1-vs1.9.2kenobi.3 (sfrost_at_kenobi) (gcc version 3.3.4
(Debian 1:3.3.4-13)) #1 SMP Thu Sep 30 15:28:02 EDT 2004

Oops:
------------[ cut here ]------------
SMP
Modules linked in: ipt_REDIRECT ipt_REJECT iptable_nat iptable_mangle iptable_filter ipt_state ipt_pkttype ipt_physdev ipt_multiport ipt_conntrack ipt_MARK ipt_LOG ip_conntrack ip_tables 8250 serial_core snd_intel8x0 s
nd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore ehci_hcd uhci_hcd usbcore intel_agp agpgart eeprom lm85 i2c_sensor i2c_i801 i2c_dev i2c_core pcspkr
CPU: 1
EIP: 0060:[log_do_checkpoint+364/459] Not tainted
EFLAGS: 00010286 (2.6.8.1-vs1.9.2kenobi.3)
EIP is at log_do_checkpoint+0x16c/0x1cb
eax: 0000006e ebx: 00000000 ecx: c036ad04 edx: c036ad04
esi: 00000000 edi: 00000001 ebp: c932d83c esp: e3a9fd0c
ds: 007b es: 007b ss: 0068
Process sendmail (pid: 9628, threadinfo=e3a9e000 task=e10c3770)
Stack: c03323c0 c031be9d c03301f7 00000169 c0335200 00294867 c1a87180 00000000
       00000000 e498574c c0476120 00000000 00000003 c180c0a0 c180cd60 c015a341
       dedcbf5c dedcbf5c dedcbf5c f314ae3c dedcbf5c c01a60ac f700f4e0 f314ae3c
Call Trace:
 [wake_up_buffer+23/83] wake_up_buffer+0x17/0x53
 [do_get_write_access+645/1583] do_get_write_access+0x285/0x62f
 [wake_up_buffer+23/83] wake_up_buffer+0x17/0x53
 [find_busiest_group+234/806] find_busiest_group+0xea/0x326
 [ext3_do_update_inode+517/1094] ext3_do_update_inode+0x205/0x446
 [radix_tree_delete+325/398] radix_tree_delete+0x145/0x18e
 [__log_wait_for_space+199/218] __log_wait_for_space+0xc7/0xda
 [start_this_handle+290/954] start_this_handle+0x122/0x3ba
 [find_get_pages+55/90] find_get_pages+0x37/0x5a
 [pagevec_lookup+46/56] pagevec_lookup+0x2e/0x38
 [truncate_inode_pages+289/696] truncate_inode_pages+0x121/0x2b8
 [journal_start+171/210] journal_start+0xab/0xd2
 [locks_delete_lock+139/221] locks_delete_lock+0x8b/0xdd
 [start_transaction+35/88] start_transaction+0x23/0x58
 [locks_remove_posix+239/268] locks_remove_posix+0xef/0x10c
 [ext3_delete_inode+0/230] ext3_delete_inode+0x0/0xe6
 [ext3_delete_inode+39/230] ext3_delete_inode+0x27/0xe6
 [ext3_delete_inode+0/230] ext3_delete_inode+0x0/0xe6
 [generic_delete_inode+147/316] generic_delete_inode+0x93/0x13c
 [iput+98/124] iput+0x62/0x7c
 [dput+231/403] dput+0xe7/0x193
 [__fput+179/260] __fput+0xb3/0x104
 [filp_close+89/134] filp_close+0x59/0x86
 [sys_close+94/113] sys_close+0x5e/0x71
 [syscall_call+7/11] syscall_call+0x7/0xb
Code: 0f 0b 69 01 f7 01 33 c0 eb b8 8d 44 24 1c 8d 54 24 24 89 44

---------------------------------------------

sfrost_at_kenobi:/home/sfrost/linux/linux-2.6.8.1> sh scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
 
 Linux kenobi 2.6.8.1-vs1.9.2kenobi.3 #1 SMP Thu Sep 30 15:28:02 EDT 2004 i686 GNU/Linux
  
  Gnu C 3.3.4
  Gnu make 3.80
  binutils 2.15
  util-linux 2.12
  mount 2.12
  module-init-tools 3.1-pre5
  e2fsprogs 1.35
  Linux C Library 2.3.2
  Dynamic linker (ldd) 2.3.2
  Procps 3.2.3
  Net-tools 1.60
  Console-tools 0.2.3
  Sh-utils 5.2.1
  Modules Loaded iptable_nat iptable_mangle iptable_filter ipt_state ipt_pkttype ipt_physdev ipt_multiport ipt_conntrack ipt_MARK ipt_LOG ip_conntrack ip_tables 8250 serial_core snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd
  soundcore ehci_hcd uhci_hcd usbcore intel_agp agpgart eeprom lm85 i2c_sensor i2c_i801 i2c_dev i2c_core pcspkr

---------------------------------------------
sfrost_at_kenobi:/home/sfrost/linux/linux-2.6.8.1> cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 9
cpu MHz : 2794.047
cache size : 512 KB
physical id : 0
siblings : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5521.40

processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 9
cpu MHz : 2794.047
cache size : 512 KB
physical id : 0
siblings : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5570.56

---------------------------------------------
sfrost_at_kenobi:/home/sfrost/linux/linux-2.6.8.1> cat /proc/modules
iptable_nat 21356 - - Live 0xf8964000
iptable_mangle 2088 - - Live 0xf892b000
iptable_filter 2120 - - Live 0xf8830000
ipt_state 1512 - - Live 0xf8926000
ipt_pkttype 1352 - - Live 0xf88e7000
ipt_physdev 1752 - - Live 0xf88e5000
ipt_multiport 1640 - - Live 0xf88c6000
ipt_conntrack 1992 - - Live 0xf88c4000
ipt_MARK 1672 - - Live 0xf8893000
ipt_LOG 5704 - - Live 0xf88c8000
ip_conntrack 29388 - - Live 0xf8931000
ip_tables 14336 - - Live 0xf88f2000
8250 28032 - - Live 0xf891e000
serial_core 19240 - - Live 0xf88df000
snd_intel8x0 28808 - - Live 0xf88e9000
snd_ac97_codec 63596 - - Live 0xf890d000
snd_pcm 80708 - - Live 0xf88f8000
snd_timer 20492 - - Live 0xf88cc000
snd_page_alloc 8784 - - Live 0xf8844000
snd_mpu401_uart 5896 - - Live 0xf888e000
snd_rawmidi 19524 - - Live 0xf88a4000
snd_seq_device 6320 - - Live 0xf888b000
snd 42756 - - Live 0xf88d3000
soundcore 6848 - - Live 0xf8857000
ehci_hcd 24524 - - Live 0xf889d000
uhci_hcd 28376 - - Live 0xf8895000
usbcore 100420 - - Live 0xf88aa000
intel_agp 18952 - - Live 0xf8864000
agpgart 27596 - - Live 0xf885c000
eeprom 6096 - - Live 0xf8848000
lm85 19884 - - Live 0xf884c000
i2c_sensor 2344 - - Live 0xf8834000
i2c_i801 6936 - - Live 0xf8841000
i2c_dev 7552 - - Live 0xf8838000
i2c_core 18184 - - Live 0xf883b000
pcspkr 3116 - - Live 0xf8832000

---------------------------------------------
sfrost_at_kenobi:/home/sfrost/linux/linux-2.6.8.1> cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0800-087f : 0000:00:1f.0
0880-08bf : 0000:00:1f.0
0cf8-0cff : PCI conf1
ddc0-ddff : 0000:02:0c.0
  ddc0-ddff : e1000
de00-deff : 0000:02:00.0
eda0-edbf : 0000:00:1f.3
  eda0-edaf : i801-smbus
edc0-edff : 0000:00:1f.5
ee00-eeff : 0000:00:1f.5
fe00-fe07 : 0000:00:1f.2
  fe00-fe07 : libata
fe10-fe13 : 0000:00:1f.2
  fe10-fe13 : libata
fe20-fe27 : 0000:00:1f.2
  fe20-fe27 : libata
fe30-fe33 : 0000:00:1f.2
  fe30-fe33 : libata
fea0-feaf : 0000:00:1f.2
  fea0-feaf : libata
ff20-ff3f : 0000:00:1d.3
  ff20-ff3f : uhci_hcd
ff40-ff5f : 0000:00:1d.2
  ff40-ff5f : uhci_hcd
ff60-ff7f : 0000:00:1d.1
  ff60-ff7f : uhci_hcd
ff80-ff9f : 0000:00:1d.0
  ff80-ff9f : uhci_hcd
ffa0-ffaf : 0000:00:1f.1
  ffa0-ffa7 : ide0
  ffa8-ffaf : ide1

---------------------------------------------
sfrost_at_kenobi:/home/sfrost/linux/linux-2.6.8.1> cat /proc/iomem
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c9800-000cbfff : Adapter ROM
000f0000-000fffff : System ROM
00100000-3ff73fff : System RAM
  00100000-00317026 : Kernel code
  00317027-00442eff : Kernel data
3ff74000-3ff75fff : ACPI Non-volatile Storage
3ff76000-3ff96fff : ACPI Tables
3ff97000-3fffffff : reserved
f0000000-f7ffffff : 0000:00:00.0
fd000000-fdffffff : 0000:02:00.0
fe9df000-fe9dffff : 0000:02:00.0
fe9e0000-fe9fffff : 0000:02:0c.0
  fe9e0000-fe9fffff : e1000
febff900-febff9ff : 0000:00:1f.5
  febff900-febff9ff : Intel ICH5 - Controller
febffa00-febffbff : 0000:00:1f.5
  febffa00-febffbff : Intel ICH5 - AC'97
febffc00-febfffff : 0000:00:1f.1
fec00000-fec0ffff : reserved
fecf0000-fecf0fff : reserved
fed20000-fed8ffff : reserved
fee00000-fee0ffff : reserved
ffa80800-ffa80bff : 0000:00:1d.7
  ffa80800-ffa80bff : ehci_hcd
ffb00000-ffffffff : reserved

---------------------------------------------
===# lspci -vvv
0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
        Subsystem: Dell: Unknown device 0162
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [e4] #09 [2106]
        Capabilities: [a0] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

0000:00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fff00000-000fffff
        Prefetchable memory behind bridge: fff00000-000fffff
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell: Unknown device 0162
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 161
        Region 4: I/O ports at ff80 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell: Unknown device 0162
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 185
        Region 4: I/O ports at ff60 [size=32]
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell: Unknown device 0162
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 177
        Region 4: I/O ports at ff40 [size=32]

0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell: Unknown device 0162
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 161
        Region 4: I/O ports at ff20 [size=32]

0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
        Subsystem: Dell: Unknown device 0162
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 217
        Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] #0a [20a0]

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fd000000-feafffff
        Prefetchable memory behind bridge: fff00000-000fffff
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Dell: Unknown device 0162
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 177
        Region 0: I/O ports at <ignored>
        Region 1: I/O ports at <ignored>
        Region 2: I/O ports at <ignored>
        Region 3: I/O ports at <ignored>
        Region 4: I/O ports at ffa0 [size=16]
        Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Dell: Unknown device 0162
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 177
        Region 0: I/O ports at fe00 [size=8]
        Region 1: I/O ports at fe10 [size=4]
        Region 2: I/O ports at fe20 [size=8]
        Region 3: I/O ports at fe30 [size=4]
        Region 4: I/O ports at fea0 [size=16]

0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
        Subsystem: Dell: Unknown device 0162
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 169
        Region 4: I/O ports at eda0 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
        Subsystem: Dell: Unknown device 0162
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 169
        Region 0: I/O ports at ee00 [size=256]
        Region 1: I/O ports at edc0 [size=64]
        Region 2: Memory at febffa00 (32-bit, non-prefetchable) [size=512]
        Region 3: Memory at febff900 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:00.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
        Subsystem: ATI Technologies Inc Rage XL
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (2000ns min), Cache Line Size: 0x10 (64 bytes)
        Interrupt: pin A routed to IRQ 201
        Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: I/O ports at de00 [size=256]
        Region 2: Memory at fe9df000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at fea00000 [disabled] [size=128K]
        Capabilities: [5c] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:0c.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
        Subsystem: Dell: Unknown device 0156
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (63750ns min), Cache Line Size: 0x10 (64 bytes)
        Interrupt: pin A routed to IRQ 177
        Region 0: Memory at fe9e0000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at ddc0 [size=64]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [e4] PCI-X non-bridge device.
                Command: DPERE- ERO+ RBC=0 OST=0
                Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=2, DMOST=0, DMCRS=1, RSCEM-
        Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000 Data: 0000

---------------------------------------------

        Thanks,

                Stephen


_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver


About this list Date view Thread view Subject view Author view Attachment view
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Mon 18 Oct 2004 - 04:25:33 BST by hypermail 2.1.3