From: Herbert Poetzl (herbert_at_13thfloor.at)
Date: Wed 27 Oct 2004 - 14:30:00 BST
On Tue, Oct 26, 2004 at 11:26:25PM -0400, Tad Truex wrote:
> I have built a 18.104.22.168 kernel with the 1.9.2 verser patch cleanly
> applied and (I believe) correctly configured.
> I have built what I believe is a functional relatively minimal FC2 root
> directory. I used the install-fc1 script from util-vserver version 0.30
> as a basis for my install.
> I have set IPROOT to eth1:192.168.1.30 in my config . (eth1 is the
> device on the 192.168.1.0/24 subnet)
> When I try to start the vserver I get the following.
> [root_at_bertha util-vserver]# vserver fc2 start
> Starting the virtual server fc2
> Server fc2 is not running
> Can't set the ipv4 root (Function not implemented)
that doesn't sound like a working vserver kernel,
let's give the testme.sh script a run please, and
let us know what it prints ...
> Any one have a thought about where I should look for the source of the
> problem? (I checked google and the util-vserver source, but didn't turn
> anything up...)
> Thanks in advance,
> Vserver mailing list
Vserver mailing list