From: Lars E. D. Jensen (lars_at_dangvard.dk)
Date: Thu 02 Dec 2004 - 11:08:54 GMT
> > Host server /etc/network/interfaces:
> > auto eth0
> > iface eth0 inet static
> > address xxx.xxx.134.227
> > netmask 255.255.255.248
> > network xxx.xxx.134.224
> > broadcast xxx.xxx.134.231
> > gateway xxx.xxx.134.225
> > Is it because of a misconfiguration of the vservers or the network maybe?
> > The host server is using xxx.xxx.134.xxx and the vservers use
> > xxx.xxx.132.xxx, could that influence on anything?
> well, yes, but if xxx.xxx.132.118 is working fine, then
> the same setup for the others should work fine too ...
> I would assume that the following scenario:
> - the xxx.xxx.134.227/29 has a default gateway, which is
> the attached router xxx.xxx.134.225 ...
> - the xxx.xxx.132/24 would use some different default gw
> - you have only one gateway configured
> - the router does only accept the 132.118 on the 'wrong'
> xxx.xxx.134.225 gateway ...
> in any case, this can easily be debugged by somebody
> who can check (or mirror) the router port ...
Ok, can I set the vservers to use another gateway/router than the host server?
My ISP told me to try xxx.xxx.132.114
-- Med venlig hilsen / Best regards
Lars E. D. Jensen lars_at_dangvard.dk _______________________________________________ Vserver mailing list Vserver_at_list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver