About this list Date view Thread view Subject view Author view Attachment view

From: Vincenzo Agosto (netstat_at_email.it)
Date: Tue 21 Dec 2004 - 23:47:18 GMT


Liam Helmer wrote:
> You must have another postrouting rule in there. You should flush your
> tables and try again, or use -I POSTROUTING to put the new rule first.
> These are very standard things that work well, and are unaffected by
> linux-vserver.
>
> Run iptables -L -n -t nat -v and you'll see all the rules that are in
> there now.
>
> Cheers,
> Liam
>
> On Tue, 2004-12-21 at 23:26 +0100, Vincenzo Agosto wrote:
>
>>Then.... I add this iptables rules
>>iptables -I INPUT -i ppp0 -m state --state established,related -j
>>ACCEPT
>>iptables -I OUTPUT -o ppp0 -s 192.168.1.250 -j ACCEPT
>>iptables -t nat -A POSTROUTING -o ppp0 -s 192.168.1.0/24 -d !
>>192.168.1.0/24 -j SNAT --to-source <MY IP>
>>next enter in my vserver:
>><VSERVER> apt-get update
>>0% [Connecting to ftp2.it.debian.org (213.156.32.111)]
>>0% [Connecting to ftp2.it.debian.org (213.156.32.111)]
Is ok!!
I'm flushing the nat rules, re-apply the above rules and now work fine...
tnk very much
Vincenzo

-- 
   иииииииииииииииииииииииииииииииииииииииииииииииии
   и     .--.                                 _    и
   и    |o_o |     Vincenzo                 /   \  и
   и    |:_/ |                             |  () | и
   и   //   \ \                            |  \_/  и
   и  (|     | )                            \      и
   и /'\_   _/`\                              \    и
   и \___)=(___/                           debian  и
   иииииииииииииииииииииииииииииииииииииииииииииииии
_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver


About this list Date view Thread view Subject view Author view Attachment view
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Tue 21 Dec 2004 - 23:47:26 GMT by hypermail 2.1.3