About this list Date view Thread view Subject view Author view Attachment view

From: Herbert Poetzl (herbert_at_13thfloor.at)
Date: Wed 13 Apr 2005 - 23:42:08 BST


On Wed, Apr 13, 2005 at 09:54:29PM +0200, Nicolas Costes wrote:
> Le mardi 12 Avril 2005 18:37, Herbert Poetzl a écrit :
> > you can compile in and enable the vserver debugging system
> > (kernel side support) will give you plenty of messages
> > once enabled too but if you 'know' what you're looking
> > for, it's probably easy to find ...
>
> Well I recompiled with debugging support, but I do not get messages... Is
> there a command to actually enable it (Like "echo 1 > /proc/..."), or a
> particular file to look for ?

yep, you enable the debug messages (most are bit coded)
by writing the resulting number to one of the
/proc/sys/vserver/debug_* entries ...

for example 'echo 255 >/proc/sys/vserver/debug_switch'
will enable debugging for the syscall switch ...

HTH,
Herbert

> --
> <ben1> qui c'est comment configurer ipfwadm pour être le plus sécure
> possible ?
>
> - #linuxfr

> _______________________________________________
> Vserver mailing list
> Vserver_at_list.linux-vserver.org
> http://list.linux-vserver.org/mailman/listinfo/vserver

_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver


About this list Date view Thread view Subject view Author view Attachment view
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Wed 13 Apr 2005 - 23:42:34 BST by hypermail 2.1.3