From: Etienne Pretorius (etiennep_at_kingsley.co.za)
Date: Tue 21 Jun 2005 - 10:58:38 BST
Just on another note:
I did some testing, I removed the
" SNAT all -- * eth1 0.0.0.0/0
0.0.0.0/0 to:192.168.5.99 "
rule.
Changed the 196 address to a 192.168.5.49 address, and rebound all the
services to that address.
I also came accross an IRC log and used "bcapabilities"
NET_BROADCAST
NET_RAW
This made it work fine...
But how will I get this to work for the 196 address? As the host's eth1
is still a 192 address -could
this be causing some problems?
Kind Regards
Etienne
Etienne Pretorius wrote:
> Hi there,
>
> I would like to know if any1 can shed some light for me on the following:
>
> I have a "Host" with the ip addresses
> eth0 192.168.1.33
> eth1 192.168.5.99
> ppp0 <dynamic>
>
> Inside this host I have a vserver with the following ip addresses:
> eth0 192.168.1.2
> eth1 196.25.113.3
>
> My Nat table looks like so:
> Chain PREROUTING (policy ACCEPT 66 packets, 4577 bytes)
> pkts bytes target prot opt in out
> source destination
>
> Chain POSTROUTING (policy ACCEPT 2 packets, 288 bytes)
> pkts bytes target prot opt in out
> source destination
> 0 0 SNAT all -- * ppp0
> 0.0.0.0/0 0.0.0.0/0 to:<dynamic ip>
> 5 420 SNAT all -- * eth1
> 0.0.0.0/0 0.0.0.0/0 to:192.168.5.99
>
> Chain OUTPUT (policy ACCEPT 7 packets, 708 bytes)
> pkts bytes target prot opt in out
> source destination
>
> I would like the services on the vserver to be avialible to the
> outside network;
> I first thought that if I give the vserver 10.x.x.x ip addresses and
> have an aliased ip 196.25.113.3 on the host
> and then preform natting then my problem will be solved, but
> unfortunately this is not so. As I can't seem to be
> able to add the 196 address to the eth1 for the aliaseing to occur.
>
> I am just interisted what others could suggest to me to do in this
> senario.
>
> BTW using Debian kernel 2.6.8 and vserver 1.9
>
_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver