About this list Date view Thread view Subject view Author view Attachment view

From: Patrick Home (patrick_at_pmenier.dynalias.net)
Date: Thu 07 Jul 2005 - 08:15:39 BST


Hello

I'm running a debian Linux version 2.6.12.2-vs2.0-rc5. I've compiled
util-vserver 0.30 from linux-vserver.org but i got the following error when
i when to start a vserver :

Can't set the ipv4 root (Invalid argument)

I didn't have this problem with previous version from kernel 2.4.25 to
kernel 2.6.11.11

I didn't want to use debian package as it's in conflict with vpopmail-bin
(cf vkill program in /usr/sbin)

The most strange is that iface of vserver is up and /proc is mounted after i
type vserver vweb1 start :

srvweb:~/admintools/dev# ifconfig
eth0 Link encap:Ethernet HWaddr 00:11:09:93:DD:FB
          inet addr:192.168.0.23 Bcast:192.168.0.255 Mask:255.255.255.0
          inet6 addr: fe80::211:9ff:fe93:ddfb/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:52791 errors:0 dropped:0 overruns:0 frame:0
          TX packets:50594 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:13278044 (12.6 MiB) TX bytes:25745227 (24.5 MiB)
          Interrupt:23 Base address:0xb800

eth0:vweb Link encap:Ethernet HWaddr 00:11:09:93:DD:FB
          inet addr:192.168.0.230 Bcast:192.168.0.255 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          Interrupt:23 Base address:0xb800

lo Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:44407 errors:0 dropped:0 overruns:0 frame:0
          TX packets:44407 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:12361041 (11.7 MiB) TX bytes:12361041 (11.7 MiB)

srvweb:/usr/src/linux-2.6.12.2# df -hTa
Filesystem Type Size Used Avail Use% Mounted on
/dev/hda1 ext3 9.2G 1.5G 7.3G 17% /
proc proc 0 0 0 - /proc
sysfs sysfs 0 0 0 - /sys
devpts devpts 0 0 0 - /dev/pts
tmpfs tmpfs 16M 12K 16M 1% /dev/shm
usbfs usbfs 0 0 0 - /proc/bus/usb
tmpfs tmpfs 64M 2.4M 62M 4% /tmp
/dev/hda3 ext3 9.2G 531M 8.2G 6% /var
/dev/md0 ext3 4.6G 533M 3.9G 12% /usr/local
/dev/md1 ext3 9.2G 483M 8.3G 6% /web/clients
/dev/md2 ext3 9.2G 137M 8.6G 2% /home
/dev/md3 ext3 9.2G 3.2G 5.6G 37% /opt
/dev/hda9 ext3 23G 33M 22G 1% /wrk
/dev/hdc1 ext3 9.2G 1.5G 7.3G 17% /spare/racine
/dev/hdc3 ext3 9.2G 538M 8.2G 7% /spare/var
/dev/hdc9 ext3 23G 899M 21G 5% /spare/wrk
none binfmt_misc 0 0 0 - /proc/sys/fs/binfmt_misc
none proc 0 0 0 - /opt/vservers/vweb1/proc
none devpts 0 0 0 - /opt/vservers/vweb1/dev/pts

My kernel is ok (i think) :

srvweb:/usr/src/linux-2.6.12.2# grep -i legacy .config
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_VSERVER_LEGACYNET=y
CONFIG_VSERVER_LEGACY=y

I did'nt activate proc/security as i just want to test ....

Could anybody help me ?

Thanks
Patrick

_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver


About this list Date view Thread view Subject view Author view Attachment view
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Thu 07 Jul 2005 - 08:27:12 BST by hypermail 2.1.3