BTW, I forgot to mention. This vserver is built following the
Jackass! guide (http://jackass.homelinux.org/forums/viewtopic.php?t=133).
I think you need to be registered on the forums to actually follow
that link.
What this means is that it is built with GCC 4.1 and uses nptl by default.
-John
On 12/5/06, John Alberts <john.m.alberts@gmail.com> wrote:
> That's very strange. I just tried it and it works fine.
>
> Try this direct link to one of the mirrors.
> ftp://jackass.ahrends.org/jackass/vserver/jackass-vserver-i686-20060725.tar.bz2
>
>
>
> On 12/5/06, Chuck <chuck@sbbsnet.net> wrote:
> > On Tuesday 05 December 2006 10:06, John Alberts wrote:
> > > What arch do you need? If you need x86, I gave Bob P from the
> > > Jackass! project a tarball that was created around September. You can
> > > download it at one of the mirrors at:
> > > http://jackass.homelinux.org/jackass/mirror.html
> > >
> >
> > i686
> >
> > thank you however i cannot access any of the mirrors listed.
> >
> > only one answered an ftp client and it required a login other than anonymous
> >
> > > If you need an amd64 arch, I can try and tarball one up for you
> > > tonight and provide a link tomorrow.
> > >
> > > -John
> > >
> > >
> > > On 12/5/06, Benedikt Böhm <hollow@gentoo.org> wrote:
> > > > On Tuesday 05 December 2006 12:57, Chuck wrote:
> > > > > I have searched everywhere I can think of and can only find stage3 files
> > > > > dated march 2006. That will require an entire rebuild to bring it to
> > spec!
> > > >
> > > > unfortunately these are the newest vserver stage3 currently available...
> > > >
> > > > > Any place to find something done using 2006.1/gcc4.1.1? I understand I
> > > > > cannot build my own any more as there are no more vserver baselayout
> > > > > packages according to a previous msg in this list and I must use
> > production
> > > > > quality packages on this machine. I cannot use experimentals.
> > > >
> > > > As long as baselayout-1.13 is not stable, there will be no standard stages
> > > > that work with vserver... you still have to use vserver stages until it's
> > > > stable...
> > > >
> > > > baselayout-vserver still exists, and should be used in production
> > > > environments, it will be removed after 1.13 is stable...
> > > >
> > > > probably i'll create a bunch of new stages meanwhile, so that upgrade
> > loads
> > > > will decrease..
> > > >
> > > > Bene
> > > > _______________________________________________
> > > > Vserver mailing list
> > > > Vserver@list.linux-vserver.org
> > > > http://list.linux-vserver.org/mailman/listinfo/vserver
> > > >
> > > _______________________________________________
> > > Vserver mailing list
> > > Vserver@list.linux-vserver.org
> > > http://list.linux-vserver.org/mailman/listinfo/vserver
> > >
> >
> > --
> >
> > Chuck
> >
> > "...and the hordes of M$*ft users descended upon me in their anger,
> > and asked 'Why do you not get the viruses or the BlueScreensOfDeath
> > or insecure system troubles and slowness or pay through the nose
> > for an OS as *we* do?!!', and I answered...'I use Linux'. "
> > The Book of John, chapter 1, page 1, and end of book
> >
> >
> > _______________________________________________
> > Vserver mailing list
> > Vserver@list.linux-vserver.org
> > http://list.linux-vserver.org/mailman/listinfo/vserver
> >
>
_______________________________________________
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver
Received on Tue Dec 5 15:49:36 2006