Hi,
i have not much knowlege on routing and following other advice or trying
to follow solutions to similar cases
(http://www.freenux.org/~mm/wordpress/?p=10 for example) didn't work for
me. So here is the case:
-on my virtual box there are guests running in 2 different subnets:
192.168.1.0/24 and 192.168.2.0/24
-192.168.2.0/24 is supposed to be a DMZ.
-the virtual box has 2 interfaces: eth0 for routing 192.168.1.0/24 and
eth3 for routing 192.168.2.0/24
----------------------------------------------------------------------------------------------
| vhost3-----vhost4 vhost1-----vhost2
|
|__________________________________________________________|
| |
| 192.168.2.0/24 via eth3 |
192.168.1.0/24 via eth0
| |
| |
|_________ _______________________|
| |
router ----> wireless wan / Internet
I just want the 192.168.2.0/24 to be routed via eth3 and 192.168.1.0/24
via eth0. The router/firewall will take over afterwards.
Suggestions?
_______________________________________________
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver
Received on Fri Apr 6 12:35:15 2007