On Thu, Aug 02, 2007 at 07:46:35PM +0900, JMDK wrote:
> Herbert Poetzl wrote:
> > On Wed, Aug 01, 2007 at 06:03:41PM +0900, JMDK wrote:
> >> Hi,
> >>
> >> I have successfully compiled a debian linux-2.6.21 kernel with vserver
> >> 2.2.0 and util-vserver 0.30.212 for the arm-based NSLU2. Both packages
> >> install fine and running the testme.sh script returns only successes.
> >
> > you might want to get the latest util-vserver version
> > (0.30.213 and soon 0.30.214) and test with that too
> > (maybe also including extended tests with testme.sh
> > and testfs.sh), but it basically looks fine ...
> >
> Right, I compiled and installed util-vserver 0.30.213, and ran testme.sh
> and testfs.sh as follows:
>
> testme.sh -v -d- L
> testfs.sh -v -x -y -z -F ext3 -D /dev/loop/0 -M /mnt
>
> Both scripts returned successes on every tests.
> >> I however saw in the compilation logs the following warning: "syscall
> >> arch arm not tested yet".
> >
> > yep, once we can confirm that it works as expected,
> > we can remove that (and you can help to do so :)
> That is precisely why I asked!
> >
> >> Does someone know which tests should be run to ensure no problems are
> >> caused by syscall and vserver works properly on arm-based computers?
> >
> > see above, and of course, a successful guest startup
> > and shutdown is a very good test too :)
> I created a test vserver and could start, enter and stop it without
> problem. I did not put it to serious use though. I will let you and the
> list know once I get that far.
excellent! so the next version will remove the
'arch arm not tested yet' for your arch/setup ...
could you please let me know which byte order
your setup is using?
TIA,
Herbert
> Regards,
> Joseph
> >
> > best,
> > Herbert
> >
> >> Thanks for your help,
> >>
> >> Joseph
> >
Received on Thu Aug 2 14:28:41 2007