[vserver] Disk limits problem?

From: Gregory (Grisha) Trubetskoy <grisha_at_apache.org>
Date: Wed 09 Sep 2009 - 20:30:31 BST
Message-ID: <20090909152524.S20212@grisha.dyndns.org>

Is there a problem in Experimental patches with disk accounting? This is a
setup that workes everywhere else, the only difference is newer VServer
patch and util-vserver... Should I try a later patch, or should I be
looking elsewhere for the problem? Any advice very much appreciated!

tagging is on:

# mount | grep /vserver
/dev/sda7 on /vservers type ext3 (rw,tag)

but it doesn't work:

# vserver zzzz enter
[root@zzzz /]# df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hdv1 10000000 0 9492184 0% /
[root@zzzz /]# dd if=/dev/zero of=xxx bs=10M count=1
1+0 records in
1+0 records out
10485760 bytes (10 MB) copied, 0.0272249 seconds, 385 MB/s
[root@zzzz /]# df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hdv1 10000000 0 9492184 0% /
[root@zzzz /]#

here is the info:

# vserver-info
Versions:
                    Kernel: 2.6.30.1-vs2.3.0.36.14-pre4
                    VS-API: 0x00020304
              util-vserver: 0.30.216-pre2841; Jul 28 2009, 02:44:38

Features:
                        CC: gcc, gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-44)
                       CXX: g++, g++ (GCC) 4.1.2 20080704 (Red Hat 4.1.2-44)
                  CPPFLAGS: ''
                    CFLAGS: '-O2 -g -m64 -mtune=generic -std=c99 -Wall -pedantic -W -funit-at-a-time'
                  CXXFLAGS: '-O2 -g -m64 -mtune=generic -ansi -Wall -pedantic -W -fmessage-length=0 -funit-at-a-time'
                build/host: x86_64-redhat-linux-gnu/x86_64-redhat-linux-gnu
              Use dietlibc: yes
        Build C++ programs: yes
        Build C99 programs: yes
            Available APIs: v13,net,v21,v22,v23,netv2
             ext2fs Source: e2fsprogs
     syscall(2) invocation: alternative
       vserver(2) syscall#: 236/glibc
                crypto api: beecrypt
           python bindings: yes
    use library versioning: yes

Paths:
                    prefix: /usr
         sysconf-Directory: /etc
             cfg-Directory: /etc/vservers
          initrd-Directory: /etc/rc.d/init.d
        pkgstate-Directory: /var/run/vservers
           vserver-Rootdir: /vservers
Received on Wed Sep 9 20:30:57 2009

[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Wed 09 Sep 2009 - 20:30:58 BST by hypermail 2.1.8