Re: [vserver] OpenVPN Interface

From: Herbert Poetzl <herbert_at_13thfloor.at>
Date: Tue 23 Nov 2010 - 17:50:54 GMT
Message-ID: <20101123175053.GJ22394@MAIL.13thfloor.at>

On Tue, Nov 23, 2010 at 05:22:54PM +0000, Gordan Bobic wrote:
> On 11/23/2010 04:50 PM, Daniel Hokka Zakrisson wrote:
> >Gordan Bobic wrote:
> >>Hi,

> >>I'm trying to get an OpenVPN server running in a guest and I have
> >>a peculiar problem. I cannot seem to manually create an OpenVPN
> >>interface exactly the same as what is created by:

> >># openvpn --mktun --dev tun0
> >>TUN/TAP device tun0 opened
> >>Persist state set to: ON

> >># ip link
> >>77: tun0:<POINTOPOINT,MULTICAST,NOARP> mtu 1500 qdisc noop state DOWN
> >>qlen 100
> >> link/[65534]

> >>How can a device with link type [65534] be created using the ip
> >>commands? The closest I could come up with is something like:
> >># ip tunnel add tun0 mode ipip local 192.168.0.1 remote 192.168.0.2
> >># ip link set tun0 mtu 1500
> >># ip addr add dev tun0 local 192.168.0.1 peer 192.168.0.2

> >If this is for a guest, why don't you just set
> >/etc/vservers/<guest>/interfaces/<x>/tun?

> How do I tell it there to set it up as a pointopoint link?

/etc/vservers/PTPTUN/interfaces/tun/
dev : tun0
ip : 10.0.0.1
peer : 10.0.0.2
prefix : 24
tun

HTH,
Herbert

> Gordan
Received on Tue Nov 23 17:51:44 2010

[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Tue 23 Nov 2010 - 17:51:44 GMT by hypermail 2.1.8