From: Dirk Ruediger (dgrue_at_web.de)
Date: Sat 13 Aug 2005 - 08:37:13 BST
Hi all,
I just installed (that means 14 days ago) linux-vserver and run ~12
vservers on one physical box running different services inside every
vserver (mail server, web server, etc.). It works great! The iptables
firewall (via firehol) is filtering all the traffic for the vservers.
I wanted to have a DMZ and installed an additional network card to bind
all these vservers to. But then I discovered the dummy device and want
to change eth1 against dummy0 (after installing the dummy module ;-)
and remove the additional network card from the server if it can be done.
But first I want to know, if this is common =good) practice. Or should I
rather tinker with bridge and tun devices? The mailing list shows many
things possible (vlan, bridge, dummy), but I can't see, what the best
practices are.
If I can gather all th information needed, the I am willing to write
some doku in the wiki at linux-vserver.org :-)
Thanks for your advice.
Greetings
Dirk
_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver