Re: [Vserver] 2006.1 Gentoo x86 stage3 for vserver ?

On Tuesday 05 December 2006 11:07, Benedikt Böhm wrote:
> On Tuesday 05 December 2006 16:06, John Alberts wrote:
> > What arch do you need? If you need x86, I gave Bob P from the
> > Jackass! project a tarball that was created around September. You can
> > download it at one of the mirrors at:
> > http://jackass.homelinux.org/jackass/mirror.html
> >
> > If you need an amd64 arch, I can try and tarball one up for you
> > tonight and provide a link tomorrow.
>
> please take a look at http://dev.croup.de/repos/gentoo-vps/stages/ if you
want
> to build own stages... you will need catalyst for the script to work...

:) don't really care about building stages etc, i just need a production, very
recent template to clone that uses the new clib, gcc4.1.1 and nptl..
converting an older version stage will take way too long as i work in a
production environment and we must deliver this machine to the customer fully
tested and debugged tomorrow morning..

this is why i have almost no time for testing any more and why i got so upset
i had to waste time researching that arping fiasco with the net code. :(
by my schedule i was supposed to have that vserver code i am downloading now
running and doing its updates last night but instead i spent it chasing down
behavior pointing to an automatically included arping module that i found out
about thanks to a forum tip.

>
> i will give it a run during this week, and upload the new stages then...
>
> >
> > -John
> >
> > On 12/5/06, Benedikt Böhm <hollow@gentoo.org> wrote:
> > > On Tuesday 05 December 2006 12:57, Chuck wrote:
> > > > I have searched everywhere I can think of and can only find stage3
> > > > files dated march 2006. That will require an entire rebuild to bring
it
> > > > to spec!
> > >
> > > unfortunately these are the newest vserver stage3 currently available...
> > >
> > > > Any place to find something done using 2006.1/gcc4.1.1? I understand I
> > > > cannot build my own any more as there are no more vserver baselayout
> > > > packages according to a previous msg in this list and I must use
> > > > production quality packages on this machine. I cannot use
> > > > experimentals.
> > >
> > > As long as baselayout-1.13 is not stable, there will be no standard
> > > stages that work with vserver... you still have to use vserver stages
> > > until it's stable...
> > >
> > > baselayout-vserver still exists, and should be used in production
> > > environments, it will be removed after 1.13 is stable...
> > >
> > > probably i'll create a bunch of new stages meanwhile, so that upgrade
> > > loads will decrease..
> > >
> > > Bene
> > > _______________________________________________
> > > Vserver mailing list
> > > Vserver@list.linux-vserver.org
> > > http://list.linux-vserver.org/mailman/listinfo/vserver
> >
> > _______________________________________________
> > Vserver mailing list
> > Vserver@list.linux-vserver.org
> > http://list.linux-vserver.org/mailman/listinfo/vserver
> _______________________________________________
> Vserver mailing list
> Vserver@list.linux-vserver.org
> http://list.linux-vserver.org/mailman/listinfo/vserver
>

-- 
Chuck
"...and the hordes of M$*ft users descended upon me in their anger,
and asked 'Why do you not get the viruses or the BlueScreensOfDeath
or insecure system troubles and slowness or pay through the nose 
for an OS as *we* do?!!', and I answered...'I use Linux'. "
The Book of John, chapter 1, page 1, and end of book
_______________________________________________
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver