About this list Date view Thread view Subject view Author view Attachment view

From: Jason Kent (jae_kent_at_yahoo.ca)
Date: Thu 15 Jan 2004 - 20:02:16 GMT


For those of you who read my previous inquiry I've
decided to go with 0.26 instead of 0.27 or 0.29.

 So far I've downloaded vserver-0.26.src.tar.gz to my
Debian(woody) box and I have a partition (/vservers)
where I will be running my vservers. I have
accomplished this feit before but lost my HDD and all
the instructions I had on the setup/install.
Previously I used the install-pre.sh, -post.sh and
-fix.sh files but cannot remember how I got it work. I
have tried to install this setup but end up screwing
my initial console and sending my box into a never
ending rebooting sequence where I am unable to recover
it and have to start over from the debian
installation. I am trying to show my bosses (who are
dead against using Open Source solutions) the benifits
of using Linux and other Open Source products to
accomplish what they think only Microsoft can do. All
I ask is that someone send me some instructions on
howto setup using the install-***.sh files or even a
link that will point me to a helpful site.

 .. Thanks .. Jae

______________________________________________________________________
Post your free ad now! http://personals.yahoo.ca
_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver


About this list Date view Thread view Subject view Author view Attachment view
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Thu 15 Jan 2004 - 20:03:53 GMT by hypermail 2.1.3